Megger also offers precision test equipment for a variety of telecommunication and data communication applications. These test instruments include TDRs,insulation and continuity testers, battery testers, earth testers and hand-held network certifiers.
Whether locating cable faults or testing the integrity of communication, power, or control cables, TDRs from Megger provide fast and accurate results. Each unit is a safe, low-voltage tester that can be used on virtually all cable types, whatever their power rating.
Specifically for the Power industry • Fused Croc-clip lead set 2m • 300V CAT III (415V Phase to Phase) • Intermittent fault location • No blocking filter required • 15 memory trace storage • Weather proof to IP54
Ideal for engineers with little TDR experience, the TDR20000/2P can perform single or dual channel measurements on a wide range of metallic cables.The Megger TDR2000/2P is a state of the art, Monochrome dual channel Time Domain Reflectometer, capable of identifying and locating a wide range of faults on cables from a few meters to 20km depending on cable type.
Cables can be compared with each other or with previously stored traces from memory. Good and bad cores in multi core cables can be compared and just the difference displayed.
Either dead or Live cables to CATIII 300V Phase to earth or 415V phase to phase can be tested. The TDR2000/2P is supplied complete with pairs of 2metre long fused test leads, fitted with 30mm gape crocodile clips for easy connection to large diameter cables. No blocking filter is required.
MEGGER TDR2000/2 Time Domain Reflectometer TDR2000/2
Megger also offers precision test equipment for a variety of telecommunication and data communication applications. These test instruments include TDRs,insulation and continuity testers, battery testers, earth testers and hand-held network certifiers
Whether locating cable faults or testing the integrity of communication, power, or control cables, TDRs from Megger provide fast and accurate results. Each unit is a safe, low-voltage tester that can be used on virtually all cable types, whatever their power rating.
20 km range at VF = 0.90 • Monochrome or colour options • Primary cell or rechargeable options • Large back lit LCD Display • Dual cursor measurement • Intermittent fault location • Output pulse amplitude and width control • “TX Null” technology • No blocking filter required • Trace Master PC software included • 15 memory trace storage • IP54 Rating
The MEGGER TDR2000/2 is a state of the art, monochrome or colour, dual channel Time Domain Reflectometer, capable of identifying and locating a wide range of faults on metallic cables.
The TDR2000/2 has a minimum resolution of 0.1m and a maximum range of 20 km at VF=0.9 and 16 Km at 0.65 VF. The TDR2000/2 can perform single or dual channel measurements on a wide range of metallic cables. Active channels can be compared with each other or with previously stored traces from memory. Differential channel measurements are possible and cross talk between channels can also be identified.
The TDR1000/2 is a hand held, compact Time Domain Reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1m/0.3ft and a 3km/9kft maximum range depending on Velocity factor selected and cable type.
Four output impedances are available (25, 50, 75, and 100 ohms) and a velocity factor between 0.30 and 0.99 will meet any cable test requirements.
